Ford F150 Dashboard Lights Not Working

by Christine Chan January 6, 2023

If you have failing lights in your Ford F150 Dashboard then this is a sign that your instrument cluster is failing. The instrument cluster is the control panel for all your vehicle’s gauges and lights, so when it starts to fail, it can cause many issues.

If you’re having problems with your instrument cluster, the best thing to do is to take it to a qualified mechanic or dealership to have it checked out. If they identify that it is the cluster then your next step is to reach out to the ISS Automotive team to get a replacement or repair.

Click here to look up your vehicle > Ford F150 Instrument Cluster

Instrument Cluster Top Failures

The top failures for F150 instrument clusters are listed below. These top failure rates were determined from data collected since 2005 for model years 2006 through 2009.

The navigation screen goes blank
Intermittent power loss
Dash lights failing
Reading not displayed on Odometer, Tachometer, Speedometer, Fuel gauge, Engine coolant temperature
The oil pressure gauge is not reading correctly
Dimmer switch not working
Circuit board failure

Yes, My Instrument Cluster has Failure, Now What?

We recommend either you purchase a replacement online with a reputable company like ISS Automotive or you take your vehicle to either a local repair shop or dealer. If the issue is a minor one, like a fuse or connection issue, then you may be able to fix it yourself.

Checkout ISS Automotive for your next instrument cluster.

Common Questions about Ford F150 Dashboard Lights

Why are my dashboard lights not working?

There are several reasons why your dashboard lights may not be working. First, check to see if any of the fuses in the vehicle have blown. If a fuse has blown, it will need to be replaced before the lights will work again.

Another possible reason for the non-working dashboard lights is a problem with the instrument cluster itself. If the cluster is not receiving power, it will not be able to illuminate the lights. This can often be caused by a faulty connection or a blown fuse.

If your vehicle is equipped with daytime running lights, they may be the reason the dashboard lights are not working. Daytime running lights use a separate bulb from the regular headlights, and they are often on a different circuit. If one of the bulbs has burned out, it could cause the dashboard lights to stop working.

Finally, a problem with the body control module could also cause the dashboard lights to stop working. The body control module is responsible for controlling many of the electrical components in the vehicle, and if it is not working properly, it could cause the dashboard lights to fail.

If you are having trouble with your dashboard lights, it is best to take the vehicle to a qualified mechanic or electrician for diagnosis and repair. Trying to fix the problem yourself could result in further damage to the vehicle.

What are the lights on the instrument cluster?

The instrument cluster is located in the center of the dash on most Ford vehicles. It houses the speedometer, tachometer, fuel level gauge, and warning lights.

The lights on the instrument cluster can be divided into two groups:

The warning lights are designed to alert the driver to potential problems with the vehicle. These lights include the oil pressure light, battery light, brake light, and engine light.

The other lights on the cluster are designed to illuminate certain features, such as the high beam indicator or the turn signal indicator.

Headlight switch out

The first thing you should check if your ford f150's dashboard lights are not working is the headlight switch. Over time, the headlight switch can become worn out, making it difficult to make the connection between the switch and the headlights. If this is the case, you can try replacing the headlight switch. You can find a replacement headlight switch at most auto parts stores.

How do you fix dash lights that won't light?

There are a few things that could be causing your dash lights not to come on. Make sure you check all the fuses first. If that doesn't work, then it could be a problem with the bulbs or the wiring. You can try replacing the bulbs first and see if that fixes the problem. If not, then you'll need to trace the wiring to see if there is a broken or loose connection somewhere.

Why are my interior lights not working?

There are a number of reasons why your interior lights may not be working. First, check to make sure that all the bulbs are screwed in tightly. If they are, then check the fuse box to see if a fuse has blown. If neither of these is the problem, then it is likely that the issue is with the wiring. You may need to consult a professional to have the problem diagnosed and repaired.

How do you reset the lights on your dashboard?

To reset the lights on your dashboard, you will need to consult your car's owner's manual. Each car is different, so the process for resetting the lights will vary. In general, you will need to locate the fuse box and find the fuse that controls the dashboard lights. Once you have found the correct fuse, you will need to remove it and then replace it. This should reset the lights on your dashboard. If the problem persists, you may need to take your car to a mechanic for further diagnosis.

Is there a fuse for the instrument panel lights?

The instrument panel lights on your Ford F-150 truck are controlled by a fuse. If this fuse has blown, then the lights will not work. You will need to replace the fuse in order to get the lights working again.

If you are unsure of which fuse controls the instrument panel lights, consult the owner's manual for your truck. It should have a diagram that shows which fuse goes to what. Alternatively, you can also use a fuse tester to determine which fuse is blown.

Once you have replaced the fuse, the instrument panel lights should start working again. If they do not, then there may be a problem with the wiring. Consult a professional.

What is the purpose of all the lights in a vehicle?

The purpose of all the lights on a vehicle's dashboard is to inform the driver of the status of the car. The position of the lights also indicates which system or feature of the car is in use.

Here is the list of all the lights and their meanings:

Cluster lights: These indicate the status of the engine, transmission, oil level, battery, and temperature.
Fog lights: These are used to improve visibility in foggy or misty conditions.
Headlights: These are used to light up the road ahead during nighttime driving or in low-visibility conditions.
Brake lights: These indicate to other drivers when the vehicle is slowing down or stopping.
Turn signals: These indicate to other drivers which direction the vehicle is turning.
High beam indicator: This light comes on when the driver turns on the high beams.
Tail lights: These light up the rear of the vehicle and make it more visible to drivers behind.
Parking lights: These are used to make the vehicle more visible at night or in low-light conditions.
Reverse lights: These come on when the driver shifts the car into reverse.
Engine compartment light: This comes on when the engine is turned on.
Door ajar light: This comes on when any of the doors are not fully closed.
Seatbelt reminder light: This comes on when the driver or any of the passengers are not wearing their seatbelts.
ABS Light: This light comes on when there is a problem with the anti-lock braking system.
Airbag Light: This light comes on to remind the driver to fasten their seatbelt. It will also come on if there is a problem with the airbag system.
Battery Light: This light comes on to indicate that the battery is not being charged properly.

Why are my brake lights not working but my blinkers do?

There are a few reasons why your brake lights may not be working, even though your blinkers are. One possibility is that a brake light fuse has blown; another is that the brake light switch is not working properly. If you have checked both of these things and still can't get your brake lights to work, it's possible that there is a problem with the wiring between the brake light switch and the brake lights themselves. If you suspect this may be the case, you'll need to have a professional mechanic take a look at your vehicle to diagnose and resolve the problem.

Why do some lights work in my truck but other lights do not work?

If your parking lights work, and headlights work but your taillights do not work, there may be a problem with your taillight bulbs or your taillight fuse. Check your taillight bulbs and replace them if they are burned out. If your taillight fuse is blown, replace it with a new one.

Check both fuse boxes in your truck, one is located under the dash and the other is located under the hood on the outer edge of the engine bay.

If you have checked both fuse boxes and there are no blown fuses, the problem may be with a loose wire or connector. Check all the wires and connectors going to your taillights. If you find a loose wire or connector, tighten it or replace it as needed.

If you have checked the bulbs, fuses, and wires and everything appears to be in working order, the problem may be with the taillight assembly itself. If this is the case, you will need to replace the entire assembly.

If your truck is equipped with LED taillights, the problem may be with the LED modules or the wiring harness. Check for loose or damaged modules and replace them as needed. If the wiring harness is damaged, you will need to replace it.

If you have checked all of the above and you are still having problems with your taillights, please consult a certified mechanic or your local Ford dealership for further diagnosis.

What are the switches on the dash of my Ford F-150 for?

There are a variety of switches on the dash of your Ford F-150, and each one serves a different purpose.

Here is a brief overview of what each switch does:

Headlight or headlamp switch: This controls the headlights, as well as the daytime running lights (if equipped).
Fog light switch: This controls the fog lights (if equipped).
Parking light switch: This controls the parking lights.
Turn signal switch: This is used to activate the turn signals.
Wiper/washer switch: This controls the windshield wipers and the washer system.
High beam switch: This is used to activate the high beams.

These are just a few of the switches that may be on your Ford F-150 dash. For more information about the switches on your specific vehicle, contact Ford motor company or consult your owner's manual.