GM Keyless Entry Remote [All You Need to Know]

A GM keyless entry remote or key fob allows you to unlock or lock your vehicle without using a physical key. Instead, the door is unlocked when you push a button on the remote, which sends a signal to your car.

Click to buy a replacement > GM Key Fob Keyless Entry Remote

What is a dead-key fob?

A dead key fob is a keyless entry remote that is not working. It could be because the battery is dead, the remote is not programmed, or the relay switch in the fob is defective.

How do I know my keyless entry remote is broken?

One way to know if your keyless entry remote is broken is if your car doesn't start when you press the button. Another sign that your keyless entry remote is broken is if your power door locks fail to function.

If neither of these two things is happening, then you have a less severe problem and you can try troubleshooting it yourself.

Where can I buy a new keyless entry remote?

ISS Automotive offers replacement keyless entry remotes. You can try your local auto repair business or dealership center to help with proper service.

You will want to make sure that the new FOB provides reliable operation for proper safety procedures.

Can a GM keyless remote be reprogrammed?

In most cases, a GM keyless remote can be reprogrammed. However, there are a few exceptions. If your car has an aftermarket alarm system or if you have replaced the original factory keyless remote with an aftermarket one, the car may not be able to program the new remote. In this case, you will have to contact your local dealership service department and ask them about reprogramming.

Click here to read: Chevy Avalanche Key FOB Replacement [Expert Guide] >

How much is a new GM key fob?

The cost of a new GM key fob depends on the make and model of your car. However, on average, a new fob for a GM car costs from $65 to $300.

How do you program a keyless entry remote?

Programming a keyless entry remote is quite easy as long as you have the right equipment and knowledge. It really depends on the vehicle and the FOB. Below are the directions for 2003 to 2007 FOBs.

All currently programmed and new remotes must be reprogrammed to the vehicle.

Please have it in hand at the time of programming.

• 1. Close all vehicle doors.
• 2. Insert the key into the ignition.
• 3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
• 4. Perform steps 5 through 8 in fairly rapid succession.
• 5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
• 6. Turn the ignition switch to the OFF position.
• 7. Turn the ignition switch to the ON position.
• 8. Turn the ignition switch to the OFF position.
• 9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
• 10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
• 11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
• 12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

Normally the automotive service manuals will contain the instructions for programming keyless entry remotes.

How to exit programming mode?

There are a few ways to exit programming mode, but the easiest way is to open the driver's side door and shut it three times.

Click here to read: Sticky Car Phone Holder [How to Choose the Best One] >

How do you return back to normal mode?

You can return back to normal mode by pressing any button on the remote once. This will signal the vehicle to stop monitoring for remotes and return to its normal setting.

Why is my keyless remote not working?

It may be time to replace the battery in your key fob. There are two types of batteries for remotes:

1. Standard alkaline batteries (disposable).
2. Lithium-ion 3-volt battery (rechargeable, longer-lasting than alkaline).

If your keyless remote is not working, try replacing the battery. If that does not work, it may be time to purchase a new remote.

There are a few things you can do to try to fix your keyless remote before purchasing a new one:

• Try replacing the battery.
• Check to see if your keyless remote is in "learn" mode. If it is, press the "unlearn" button.
• If your keyless remote has a switch on the side, make sure the switch is in the "lock" position.

If your keyless remote is still not working, it may need to be reprogrammed.

What is a transmitter?

A transmitter is a term used for a keyless remote.

What does using a transmitter pocket start to mean?

It means that the transmitter is in the correct position for your vehicle to start. The transmitter is usually in the pocket on the driver's side of the vehicle. If it is not in the correct position, your car will not start.

What are the signs of a low transmitter battery?

The common signs of a low transmitter battery are:

• A low-battery light will appear on the dashboard.
• The keyless entry system may not work as well as it once did.
• The key fob may have a more difficult time locking or unlocking the doors.
• The lights on the keyless entry system may blink faster than normal.
• The driver information center will display "Transmitter Battery Low."

If you are experiencing any of these signs, then it means you have a low transmitter battery and time to replace it.

What is the transmitter pocket on Chevy Malibu 2017?

It is the location where you put your keyless fob to open up your car. It's usually on the driver's side of the car. If it's not in the right spot, your car will not start.

Does the 2017 Chevy Malibu LT have a remote start?

No, the 2017 Chevy Malibu LT does not have a remote start. However, there are other models of the Chevy Malibu that do have a remote start option.

How do you start a car with a pocket transmitter?

To start a car with a pocket transmitter, you must have the transmitter in the correct position. The transmitter is usually in the pocket of the driver's side of the car. If it is not in the right spot, your car will not start.

Can you start Chevrolet Malibu with a remote key?

Yes, the key slot is located on the driver's door. You can start a Chevrolet Malibu with a remote key. The remote key is used to unlock and start the car.

Where is the transmitter pocket in a 2016 Chevy Malibu?

The transmitter pocket location is on the driver's side of the car. It is usually in the pocket of the driver's side door.

How much is a replacement transmitter battery?

Replacement transmitter batteries usually cost around $5.00, prices may vary depending on the type of transmitter battery you need. You can purchase transmitter batteries at most local stores.

How to replace the Chevrolet Malibu transmitter battery?

There are a few ways to replace the transmitter battery in your Chevrolet Malibu:

• Open the remote control and remove the old battery.
• Remove the battery cover on the back of the remote control and insert the new battery.
• Replace the battery cover and close the remote control.
• Take the remote control to a local store that sells batteries and have them install the new battery for you.

If you are not comfortable opening the remote control and replacing the battery yourself, you can always take it to a local store that sells batteries and have them install the new one for you.

Where is the location of the transmitter pocket in GM vehicles?

The location of the transmitter pocket in GM vehicles is usually on the driver's side. It can also be located at the front door, on the key fob, or in the center console storage area.

If you are not able to find it there, you can check the OEM service manual for the specific location of your transmitter pocket.

What to do when there is no remote detected?

If you are having trouble with your remote, there are a few things you can try. First, make sure the batteries are fresh and installed correctly. Next, check the programming button on your car. It is usually located near the driver's seat. If the button is not working, you may need to replace it. Finally, if you are still having trouble, you can contact a GM dealership for assistance. They will be able to help you troubleshoot the problem and determine if you need a new remote.