How To Remove A 2009-14 Ford F-150 Instrument Cluster
If you’re ready to get your 2009-2014 Ford F-150 instrument cluster repaired, this post will walk you through the removal process step by step. All you need are a few simple tools and a garage or driveway to work in - you’ll give new life to your old dash in no time at all.
Tools Required
To remove this instrument cluster you will need:
- 7 mm socket wrench and a small ratchet
- Pry tool or flathead screwdriver
- Magnet or needle nose pliers
To make this job a little easier, you might want to have a magnet or needle nose pliers on hand to get some of the screws that are recessed into the dash and possibly hard to get to by hand.
Remove Your F-150 Instrument Cluster
1. Begin by lowering the steering column into its lowest position.
2. Use your 7mm socket attached to your small ratchet to remove the two screws that attach the top of the instrument panel to the dash.
3. Once the screws have been removed use your pry tool to pry the bottom corners of the bezel away from the dash.
4. You can then pull the top left and right corners away from the dash.
5. Pull the bezel forward and remove it.
6. There are four 7mm screws that attach the instrument cluster to the dash two on the top and two on the bottom. The two on the bottom are recessed screws that we mentioned earlier that you may need a needle nose or a magnet to remove.
7. After they have been unscrewed remove the screws with your socket wrench.
8. Then unplug it by compressing the tab on the plug and pulling it away.
9. You can now remove the cluster.
Install Your New Ford F-150 Instrument Cluster
10. To install the cluster, position the cluster top first into the dash and plug it in. You can now set the cluster in place by aligning the two posts at the bottom corners with the two alignment holes in the cluster.
11. You can now reattach the four 7mm screws with your socket wrench.
12. Install the bezel by putting it back into position and pressing the bezel tabs into the dash.
13. You can now reattach the two 7mm screws on the top of the instrument cluster bezel with your small ratchet. It is helpful to start them by hand.
14. Installation is now complete.
How Much Does 2009-2014 Ford F-150 Instrument Cluster Repair Cost?
Like all electronic equipment, cost varies from year to year, and by vehicle. For the 2009-2014 F-150 cluster repair, prices generally range from $100 to $200 at ISS Automotive. Follow the links in the table below for exact pricing.
| Ford F-150 Cluster Repair From ISS Automotive |
| 2004-08 Ford F-150 Instrument Cluster Repair |
| 1999-03 Ford F-150 Instrument Cluster Repair |
| 2009 Ford F-150 Instrument Cluster Repair |
| 2010 Ford F-150 Instrument Cluster Repair |
| 2011 Ford F-150 Instrument Cluster Repair |
| 2012 Ford F-150 Instrument Cluster Repair |
| 2013 Ford F-150 Instrument Cluster Repair |
| 2014 Ford F-150 Instrument Cluster Repair |
| 2015 Ford F-150 Instrument Cluster Repair |
| 2016 Ford F-150 Instrument Cluster Repair |
Can I Replace The Instrument Cluster Myself?
This DIY project is simple enough for anyone with basic tools and some time to complete at home by following the instructions. If you need any assistance along the way, we're here to help!
Where Should I Get My Ford Instrument Cluster Repaired?
If you're looking for instrument cluster repair services for your Ford F-150, ISS Automotive is the best place to look. Our products and services meet OEM standards, ensuring your repaired cluster aligns with Ford's specifications. And, all of our products come with a 30 day warranty and protection. Limited Lifetime warranties are also available.
With over 70 years of expertise in automotive electronics, our products are built on trust and quality. Have questions or need installation support? Contact us and place your order today.