How To Remove A 2015-20 Ford F-150 Instrument Cluster

by Laura Dominguez November 15, 2024

If the instrument cluster in your 2015-2020 Ford F-150 needs repair, this How To post is for you. Removing your instrument cluster is something that is easy and can be done in a short time in your driveway. Follow the steps below and watch the installation video to figure out the process - you’ll be on your way in no time.

Tools Needed

To remove this instrument cluster you will need a few tools:

A 7 mm socket wrench
A small ratchet
A pry tool or a flat head screwdriver

Removing Your Ford F-150 Instrument Cluster

1. To begin use your pry tool to pry the top corners of the lower dash cover away from the dash.

2. Allow the panel to drop down revealing the two screws that hold the instrument cluster bezel on the bottom.

3. Remove the two 7mm screws.

4. Next lower the steering column into its lowest out position for better access.

5. Pry the leather cover away from the upper steering column cover.

6. Then working around the bezel with your hands pull it away from the dash to release the clips.

7. Pull out and remove the instrument cluster bezel.

8. Here you'll be able to see the tabs that hold the leather cover to the steering column cover.

9. The cluster is held in by four 7 mm screws there's one at the bottom corner of the cluster and one on each top corner. You may need to use a small ratchet to remove the top corner screws.

10. Once the screws have been removed, pull the cluster towards you, compress the tab on the back of the plug, pull and remove it from the cluster.

11. You can now remove the instrument cluster.

Installing The New F-150 Cluster

12. To install the cluster position the cluster into it slot and plug it in.

13. You can now set the cluster in place.

14. Align the two posts on the bottom corners with the two alignment holes in the cluster.

15. You can now attach the four 7 mm screws.

16. You can now reinstall the cluster bezel by putting it back into position. and pressing the bezel tabs into the dash.

17. Press the bezel tabs into the dash.

18. Then you will reattach the two 7 mm screws on the bottom.

19. Lift the lower dash cover into position and press the tabs into the dash.

20. Installation is now complete.

How Much Does 2015-20 Ford F-150 Instrument Cluster Repair Cost?

Like all electronic equipment, cost varies from year to year, and by vehicle. For repair of the 2015-2022 F-150 cluster, costs can run anywhere between $100 and $200 at ISS Automotive. Follow the links below to see the exact pricing for your model year.

Ford F-150 Cluster Repair From ISS Automotive

2004-08 Ford F-150 Instrument Cluster Repair

1999-03 Ford F-150 Instrument Cluster Repair

2009 Ford F-150 Instrument Cluster Repair

2010 Ford F-150 Instrument Cluster Repair

2011 Ford F-150 Instrument Cluster Repair

2012 Ford F-150 Instrument Cluster Repair

2013 Ford F-150 Instrument Cluster Repair

2014 Ford F-150 Instrument Cluster Repair

2015 Ford F-150 Instrument Cluster Repair

2016 Ford F-150 Instrument Cluster Repair

Can I Replace An F-150 Instrument Cluster Myself?

Yes, you can! This is a DIY project that anyone with a few tools and some time can do at home by following the instructions. If you need help, we’re here to assist you.

Where Should Get My F-150 Instrument Cluster Repaired?

If you need your Ford F-150 cluster repaired, ISS Automotive is the place to start. Our products are engineered to match OEM standards, so you’ll get repair services and parts that meet Ford specs.

With over 70 years of experience in automotive electronics, you can trust our work. Need help with installation or more information? Contact us and order today.